Guangzhou City YingKai Industrial Co.,Ltd.£¬Today is£º

Guangzhou City YingKai Industrial Co.,Ltd.
hotline
Guide
Contact us


Tel£º86 020 82329511
Mobile£º13288630826
Fax£º86 020 82329511
Contact£º Mr.Zhang
Address£ºChina Huan River Industrial Zone, Tianhe District, Guangzhou City, No. 22-3, 2nd

Location£ºHome > Guidelines
Guidelines

Membership card making process: plate making the piece to printing (screen printing/offset printing), the synthetic - punching - points card after process/quality control - (hot stamping, spray code, bar code, write magnetic) - quality packaging

Because the process is more, the goods time is generally about a week or so for shipment. If the goods time is urgent, want to order or urgent as soon as possible.

Membership card specifications: membership card of the finished product size is 85.5 * 54 mm (bleeding manuscript size is 89 * 57 mm), thickness of 0.76 mm.

Non-standard specifications for special-shaped CARDS, non-standard card need to open another mould cost, mould cost is about 800-800 yuan

In order to avoid cutting position deviation, as from the cutting edges is greater than 3 mm (82 x 50 mm range).

Magnetic stripe edge distance of 4 mm, magnetic stripe width is 12.7 mm.

Convex yards edge sizes of finished product (up and down or so) is greater than 5.5 mm.

The membership card design software and formats: general use coreldraw vector software to design, file save as after the transfer curve. 14 version 9.0 or CDR format.

Coreldraw or illustrator (AI) are commonly used vector graphics design software, save the file, respectively. The CDR and. AI format; Photoshop is a graph processing software, for the save format. The PSD. In illustrator or photoshop design articles, in order to facilitate the puzzle generally also need to be converted into a coreldraw manuscript, in a converted file in color and effect will be a bit different.

If the membership card after such as hot stamping, UV process, must provide the vector file of the coreldraw or illustrator (CDR and ai manuscript). For designing, and also can provide the best logo logo vector source file (CDR and ai manuscript).

Hold membership card printing color: color mode to CMYK. According to the relevant provisions of the printing industry of the finished product acceptance standard CMYK values each error control within 10% up and down, contrast chromatography in the standard color deviation will be deemed to be within the normal range. If you have strict requirements on printing color, must be printed page, and try to avoid using very easy to partial color color or template, such as purple, dark blue, orange, brown red, strong metal color and gradient.

(1) images on the computer screen is based on RGB color model, according to the present color is bright, and printing for CMYK color mode, different color mode, appear a little partial color is normal, and printed color will be affected by the paper and the intensity of light source. So the actual printing effect and the computer screen display effect is weak color difference.

(2) in the process of printing, the printing ink drying speed will be affected by the surrounding environment, such as temperature, humidity, thus different batch printing quality due to the changes in the environment in different times printing workshop differed, coupled with the idea of printing, printing many times before and after the same file you will be presented with a certain probability different shades of color.

When black text design using monochromatic black (C0 M0 Y0 K100), not for four color; Black background, generally USES (C60 M60 Y60 K100), C.M.Y.K four color additive shall not exceed 250% color coloring.

Line and sketches of attention; Set membership card to make the background or color reproduction is not lower than 10%, the thickness of line shall not be less than 0.076 mm, to avoid unable to render when printing the finished product; Screen printing of contributions for the line thickness and lines are not less than 0.15 mm, the gap between or screen printing paste off easily.

COREDRAW file if do the gradient color, transparent, filters and other special effects, need into a bitmap. The bitmap to a resolution of 350 dpi above;

On the card: order please indicate the number, type, digits, and the starting number. Number can be divided into convex code, PingMa, printing, laser code. Convex yards edge sizes of finished product (up and down or so) is greater than 5.5 mm, to follow the card rectangle direction; Small convex code size with 14 word, said big convex code expressed with 18 words, convex code within 16 digits. Can only choose one side convex code, can't played convex of the front yards. Character code or with a dozen 2 rows of convex code needed to use NBS machine, more troublesome also slowly.

Home|About us|Scratch|Products|Device|Member card|Guide|Order|Security|Contact us